Sleeve 3mm GREEN GN01 - 1m

Expandable Sleeve 3mm  sold by 1 meter (FR-003)  - up 200m orders mail us to sales@sleeve-modding.com for special discount

Customizing the look of your data and power cables offers an exciting opportunity to further enhance the look of your PC. ’Sleeving’ means covering a cable with a braided material that will provide better protection and give it an impecable look.

Sleeving is only for those who want PERFECTION; because of the high density material, the original insipid cables WILL NO LONGER BE VISIBLE! (You can even cover black cables with white sleeving). Masking wirings with adhesive tape is a thing of the past!

IMPORTANT NOTE ! – Please read before order !

To estimate how much sleeve you will need, we suggest the following:

1. Figure out exactly how many components/ cables will be sleeved:

ATX [24 pins]-power supply, recomended sleeve 3mm thick/0.11 inch thick

PCI-E [6/ 8 pins]-vga cards N-VIDIA 6 Pin & AMD 8pins, recomended sleeve 3mm thick/0.11 inch thick

CPU [4/8 pins], recomended sleeve 3mm thick/0.11 inch thick

SATA Power, recomended sleeve 3mm thick/0.11 inch thick

SATA Data Transfer, only sleeve 8 mm thick/0.31 inch thick

MOLEX for fan/ controller/ cables, front-panel USB 2.0(3.0)/Audio/ power/ power LED/ HDD LED etc. recomended sleeve 6 mm thick /0.23 inch thick

2. Determine the optimal ’route’ to arrange the cables inside the case; shorten or lengthen cables as required (for professional tools that shorten or lengthen cables, as well as connectors and other accessories, please consult the Modding Accessories & tools page).Is to check also our tutorials by the Forum.
    
3. Choose your desired colour scheme. Mixed colour sleeve is also available.
    
4. Measure the length for each section and sum up the total.

Recommendations:

• For a power supply unit (PSU), you will need approx. 35-40m of 3mm sleeve (depending on the PSU/case size and your personal dexterity). [That is 115-131 feet long and 0.11 inch thick];
• All lenghts are for uni –sleeve (cables one by one)
• If you want to use heatstrink tubing, purchase about 10-15% of the total length of the required sleeve (again, depeding on your skill; for beginners we reccomend 15%, so that means about 6m [20 feet] of tubing for a PSU).
• You can choose Heatshrink-tubes by meter or Pre-cut
• For 3mm /0.11 inch and 6mm/0.23 inch;  sleeve use = Heatshrink 6 mm thick /0.23 inch thick !!!
• For 8mm /0.31 inch;  sleeve use = Heatshrink 12 mm thick /0.47 inch thick !!!

FEATURES :

-Available diameters 3mm, 6mm, 8mm

-HIGH DENSITY SLEEVE,

-3 STRANDS,

-EXPANDABLE 2:1

-DIAM: 4mm - 6mm-8mm

-TEMPERATURE RANGE -50 C.......to.......+145 degree Celsius

-MELT POINT 250_+/-10 degree Celsius

-ELONGATION 30%

-MATERIAL - FLAME RETARDANT

-ROHS, UL, CSA, Halogen Free

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: